Medtronic Paradigm Link Uživatelská příručka Strana 99

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 262
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 98
Insulin sensitivity values are normally between 20 - 100 mg/dL (1.1 - 5.6 mmol/L). If your value is outside
this range, a warning message will appear on the screen.
1
Make sure the EDIT SETTINGS screen is open.
Main > Bolus > Bolus Wizard Setup > Edit Settings
2
Select Sensitivity, then press ACT.
3
The INS SENSITIVITY 1 screen appears. The default sensitivity value flashes on the screen.
4
Set the value for your first insulin sensitivity setting, then press ACT.
The start time for your first insulin sensitivity is midnight and cannot be changed.
5
The SET START TIME 2 screen appears. The dashes under the screen name flash. The first insulin
sensitivity is now set.
If you do not need a second insulin sensitivity, press ESC and skip to the next section. If you need to set
up another insulin sensitivity, follow steps 6 through 9.
6
In the SET START TIME 2 screen enter the time of the day you want this insulin sensitivity to become
active.
7
Press ACT. The INS SENSITIVITY 2 screen appears.
8
The default sensitivity value flashes. Select the value for this insulin sensitivity.
9
Press ACT. The SET START TIME 3 screen appears. The second insulin sensitivity is now set.
10
If you do not need to set up any more insulin sensitivities, press ESC. If you need to set up more insulin
sensitivities, repeat steps 6 through 9 above for each insulin sensitivity.
You are now ready to set up the BG Target.
Using the Bolus Wizard feature
80
Zobrazit stránku 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 261 262

Komentáře k této Příručce

Žádné komentáře