Medtronic Revel Uživatelská příručka stáhnout pdf (Strana 129)

3 Select your Low Repeat time. The time must be between 5 minutes (0:05) and 1 hour (1:00).

4 Press ACT. The EDIT SETTINGS screen shows the Low Repeat value set. You are now ready to set up

the Predictive Alert.

Setting the Predictive glucose alert

The Predictive alerts calculate when you may reach your Low or High Glucose Limits, then send you an

alert before you reach those limits. A Predictive alert tells you that if your sensor glucose measurements

keep falling or rising at the current rate, you may reach your Glucose Limit in the number of minutes you

selected. For a LOW PREDICTED alert, the pump plays three consecutive tones, in falling pitch, if an

audible beep has been selected as the alert type. For a HIGH PREDICTED alert, the pump plays three

consecutive tones, in rising pitch, if an audible beep has been selected as the alert type.

Understanding the Time Sensitivity Settings

To use the Predictive alerts, you need to first set your Low or High Glucose Limits, and then your Time

Sensitivities. Time Sensitivity means the length of time, in minutes, you want to be notified before you

reach your High or Low Glucose Limit. If you set the Low time sensitivity setting at 25 minutes and the

High time sensitivity setting at 20 minutes, then the Predictive alerts will be sent:

• 25 minutes before the sensor glucose reaches your Low Glucose Limit

• 20 minutes before the sensor glucose reaches your High Glucose Limit

To set up the Predictive alerts:

1 Make sure the EDIT SETTINGS screen is open.

Main > Sensor > Edit Settings

2 Select Predict Alerts, then press ACT. The PREDICTIVE ALERTS LOW/HIGH screen shows that the alerts

are turned Off.

3 Select On, then press ACT. The SET TIME SENSITIVITY LOW/HIGH screen appears and the LOW time

setting flashes the default time: 15 minutes (0:15).

4 Select the Time Sensitivity (how many minutes before you reach your Low Glucose Limit). To turn off

the Low Predictive Alert, reduce the Time Sensitivity to OFF.

•Range: 5 to 30 minutes (0:05 to 0:30)

•Increments: 5 minutes

5 Press ACT. The HIGH time setting flashes the default time: 15 minutes (0:15).

Sensor features108

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 264 265

Žádné komentáře

Medtronic Revel Uživatelská příručka Strana 129